If you’ve decided to install a smoke and CO alarm in your home, there are some things you should consider before deciding where to install it. For the most protection, smoke and CO alarms should be installed on each level of your home. Smoke alarms should be installed in areas where people sleep or work, such as bedrooms and living rooms. The best way to protect your home from these risks is to install interconnected smoke and CO alarms, which sound when one of the other goes off.
First, you should make sure all of your wirings are connected. You must click all of the wires at the breaker panel. Using wire strippers, remove about 3/4 of the insulation from each wire. Generally, smoke and CO alarms come with 120-volt wire harnesses. If the cables are not correctly connected, use wire nuts to connect the stripped NM cable wires to the corresponding color wires in the smoke alarm harness.
Carbon monoxide is a dangerous gas that can cause symptoms that mimic common illnesses. Even a tiny amount can be lethal, and symptoms can appear as fatigue, chest pain, shortness of breath, and even memory loss. Carbon monoxide can also damage the nervous system and cause death within minutes. Carbon monoxide alarms should be reprogrammable to be easily set to a certain level. The notice should be UL-certified and certified by a reputable testing laboratory.
It is essential to install a CO and smoke alarm in each sleeping area. It is advisable to install a CO detector in the hallway outside of the bedroom, and if there are several sleeping areas, install separate CO alarms in each room. Carbon monoxide detectors don’t need to be located in low places. They can be plugged into outlets near the floor. This way, the sensor can be installed without any difficulty.
Besides being a necessity, smoke and CO alarms need regular maintenance. To avoid false alarms, change the batteries regularly. Replace the batteries if they’re low or have a low battery warning. Manufacturers will list the types of batteries and how often to replace them. Those with hard-wired alarms may require the help of an electrician. If the smoke detectors are older, you should replace them with new ones that use sealed and non-rechargeable batteries. They should also be tested regularly to ensure they’re working correctly.